Sliding Gate Motor Installation in Dubai (BFT & NICE)

Sliding • Swing • Barrier Gates • Garage Doors — New Installations & Motor Replacement
Residential & Commercial Sites Across Dubai

Already have a gate installed but facing issues?
Visit our Automatic Gate Repair Dubai service for diagnosis and fault fixing.

Before We Install a Sliding Gate Motor (Dubai)

Most installation problems come from the gate, not the motor. We first check the gate movement and load so the new motor doesn’t get damaged.
Manual movement test (gate should move smoothly by hand)
Track and rollers condition (friction, wear, sand buildup)
Rack & pinion alignment (prevents jerking and gear damage)
Gate level and end stoppers (avoids hard impact)
Power supply and protection (stable power for control board)
Safety devices (photocells) placement and testing

If the gate is heavy or misaligned, we fix that first — then install the motor.

Choosing the Right Sliding Gate Motor (Dubai)

A sliding gate motor must be selected based on load, duty cycle, and environment. Using an undersized or mismatched motor leads to overheating, board failure, and early breakdown.

What we calculate before selecting a motor

Gate weight (not estimated — checked)
Gate length & inertia (long gates need higher torque)
Daily usage (villa vs building vs commercial)
Duty cycle (intermittent vs continuous operation)
Dubai conditions (heat, dust, voltage fluctuation)
Safety integration (photocells, force limits, soft stop)

Recommended Motor Classes (BFT & NICE)

Residential / Villa Sliding Gates

Quiet operation
Medium-duty motors
Optimized for heat and low noise
Suitable for daily home use

If you prefer BFT systems, see our BFT Sliding Gate Motor Dubai page for supply and compatibility.

Heavy Villa / Building Entrances

Higher torque motors
Metal gear transmission
Stable control boards with thermal protection
Designed for frequent cycles

Commercial / High-Traffic Gates

High duty-cycle motors
Continuous operation support
Advanced safety and force management
Long-term reliability under load

Motor Setup Matters More Than Brand

Even the best motor will fail if:

Force is set too high
Limits are poorly calibrated
Safety inputs are ignored
Gate resistance is not accounted for

That’s why we configure, test, and fine-tune every motor after installation.

Not sure which motor class fits your gate?
Send the gate photo, length, and usage details on WhatsApp — we’ll recommend the correct motor before installation.

👉 WhatsApp for Motor Recommendation

Our Sliding Gate Motor Installation Process (Dubai)

We install and commission the system properly — power, control board, limits, safety inputs, and final testing.

Site check + motor selection confirmation (weight, usage, duty cycle)
Mounting & base alignment (motor position, vibration control, drainage clearance)
Rack engagement setup (correct pinion contact to prevent wear and noise)
Wiring & control board setup (clean terminals, safe routing, stable power)
Programming & calibration (limits, force, soft start/stop, auto-close if needed)
Safety integration (photocells tested, safe reverse verified)
Final commissioning (smooth movement, remote range check, multiple cycle test)

Before handover, we run repeated cycles and confirm the gate stops smoothly and reverses safely when required.

What to Send on WhatsApp (Before Installation)

Want fewer breakdowns after installation? See our Gate, Barrier & Access System Maintenance Dubai plans

What to Send on WhatsApp (Before Installation)

To recommend the correct sliding gate motor and avoid rework, send us:

A photo of the gate (full view)
Gate length (approx.) and usage (villa / building / commercial)
A short video of the gate moving (if existing)
Motor label photo (if replacing an old motor)

We confirm motor class, accessories, and installation scope before visiting.

👉 WhatsApp for Motor Recommendation

Already installed but not working? Visit Automatic Gate Repair Dubai for diagnosis.

How much does sliding gate motor installation cost in Dubai?

Cost depends on gate weight, usage frequency, motor class, and accessories. We confirm the right motor and give a clear price after reviewing gate details.

Can you replace only the motor and keep the existing gate?

Yes. If the gate structure, track, and rack are in good condition, we replace the motor and reconfigure the system properly.

How long does installation take?

Most sliding gate motor installations are completed the same day, including setup, programming, and safety testing.

Do you install BFT and NICE motors only?

We mainly install and support BFT and NICE sliding gate motors due to reliability and parts availability in Dubai.

Do you provide warranty?

Yes. Warranty is provided on supplied motors and workmanship. Details are explained before installation.

Can you install motors for heavy or commercial gates?

Yes. We install higher-duty motors for buildings, parking entrances, and high-traffic gates.

Need sliding gate motor installation in Dubai?
Send your gate details on WhatsApp and get the right motor recommendation first.

👉 WhatsApp for Motor Recommendation